HL-5350DN
![]() |
Usein kysytyt kysymykset ja vianmääritys |
![](/g/b/img/product/hl5350dn_eu.jpg)
HL-5350DN
Päivämäärä: 19/08/2014 Numero: faq00000402_008
Print overrun
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Add more memory.To learn how to install additional memory, click here.
-
Set page protection to AUTO by using the supplied Windows driver.
-
Change the following settings in the Windows printer driver and try again. The best combination of the settings below will vary depending on your document:
+Graphics *
+TrueType mode *
+Use Printer TrueType® Fonts
* To change these settings, click 'Basic' tab of the printer driver. Select 'Manual' in the 'Print Settings' section. Click 'Manual Setting...'.
HL-5340D, HL-5350DN, HL-5370DW
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.