DCP-7057
Usein kysytyt kysymykset ja vianmääritys |
DCP-7057
Päivämäärä: 08/05/2012 Numero: faq00000312_028
Toner specks
Please check the following points to solve the problem:
- Make sure that you use paper that meets our specifications. Rough-surfaced paper may cause the problem.
Please refer to the FAQs "What kind of paper can I use?" and "What is the recommended paper?"
- Clean the corona wire and the drum unit.
Please refer to the FAQs "Clean the corona wire." and "Clean the drum unit."
- The drum unit may be damaged.
Put in a new drum unit. Please refer to the FAQ "REPLACE DRUM".
- The fuser unit may be contaminated. Please contact Brother Customer Service from "Contact Us"
DCP-7055, DCP-7055W, DCP-7057, DCP-7060D, DCP-7065DN, DCP-7070DW, DCP-8110DN, DCP-8250DN, FAX-2840, HL-5440D, HL-5450DN, HL-5450DNT, HL-5470DW, HL-6180DW, HL-6180DWT, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8950DW, MFC-8950DWT
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.