HL-5370DW
![]() |
Usein kysytyt kysymykset ja vianmääritys |
![](/g/b/img/product/hl5370dw_eu_as.jpg)
HL-5370DW
Päivämäärä: 10/05/2013 Numero: faq00000216_018
White spots on black text and graphics or black spots appear at 94 mm (3.7 in.) intervals.
![](/g/b/img/faqend/faq00000216_018/eu_ot/en/91896/spots.gif)
If the problem is not solved after printing a few pages, the drum unit may have glue from a label stuck on the OPC drum surface.
Clean the drum unit as follows:
-
Put the print sample in front of the drum unit, and find the exact position of the poor print.
-
Turn the drum unit gear by hand while looking at the surface of the OPC drum (1).
-
When you have found the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or glue on the surface comes off.
DO NOT clean the surface of the photosensitive drum with a sharp object.
Aiheeseen liittyvät kysymykset
HL-5340D, HL-5350DN, HL-5370DW
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.