HL-L6400DW(T)
Usein kysytyt kysymykset ja vianmääritys |
HL-L6400DW(T)
Päivämäärä: 26/02/2020 Numero: faq00000110_500
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. Select how long the machine must be idle before it goes into Sleep Mode. The Sleep Mode timer is reset when the machine receives a print job.
When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
- Press or to select the [General Setup] option, and then press OK.
- Press or to select the [Ecology] option, and then press OK.
- Press or to select the [Sleep Time] option, and then press OK.
- Press or to enter the length of time, in minutes, that the machine should remain idle before entering Sleep Mode.Press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
- Press .
- Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and then press [OK].
- Press .
HL-L5000D, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T)
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.