DCP-8025D
![]() |
Usein kysytyt kysymykset ja vianmääritys |
![](/g/b/img/product/dcp8025d_eu.jpg)
DCP-8025D
Päivämäärä: 15/09/2010 Numero: faq00000095_008
How do I install the Optional Tray Module?
- Turn off the MFC/DCP power switch, and unplug the MFC/DCP from the AC power outlet (electrical socket).
- Lift the machine carefully with both hands and place it onto the lower tray unit, so that the alignment pins of the lower tray unit are inserted into the guide holes on the bottom of the machine.
- Remove the paper tray from the lower tray option, and swap with the tray already fitted in your machine.
- To set the paper size for the lower tray, press Menu and select General Setup => Paper Size => Tray #2.
Press the UP or DOWN ARROW key to select A4, Letter, Legal, Executive, A5, B5 and B6.
Press Set, and then press Stop/Exit.
DCP-8020, DCP-8025D, DCP-8040, DCP-8045D, MFC-8420, MFC-8440, MFC-8820D, MFC-8840D, MFC-8840DN
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.