FAQs & Troubleshooting

Close

MFC-L2752DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-L2752DW

Not your product?

Date: 31/01/2022 ID: faq00100288_508

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.

Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software (Windows®) or Brother iPrint&Scan (Mac).

DCP-L2510D/DCP-L2530DW/DCP-L2537DW/DCP-L2550DN/MFC-L2710DN/MFC-L2710DW

  1. Load your document.
  2. Press (SCAN).
  3. Press or to select the [Scan to PC] option, and then press OK.
  4. Press or to select the [File] option, and then press OK.
  5. If the machine is connected over the network, press or to select the destination computer.
  6. Press OK.

    If the LCD prompts you to enter a PIN, enter the four digit PIN for the destination computer on the LCD and then press OK.

  7. Do one of the following:
    • To change the scan settings for this document, press Options or Copy/Scan Options and then go to the next step.
    • To use the default scan settings, press Start.

      The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

    • In order to change scan settings, Brother's ControlCenter software must be installed on a computer connected to the machine.

  8. Select the scan settings you want to change:
    • [Scan Type]
    • [Resolution]
    • [File Type]
    • [Document Size]
    • [ADF Auto Deskew] (available for certain models)
    • [Remove Bkg. Clr]

      (available only for the [Colour] and [Grey] options.)

  9. Press OK.
  10. Press Start.
    The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

MFC-L2730DW/MFC-L2750DW

  1. Load your document.
  2. Press [Scan]>[to PC]>[to File].
  3. If the machine is connected over the network, press or to display the computer where you want to send data, and then press the computer name.

    If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD and then press [OK].

  4. Do one of the following:
    • To change the scan settings, press [Options], and then go to the next step.
    • To use the default scan settings, press [Start].

      The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

    In order to change scan settings, Brother's ControlCenter software must be installed on a computer connected to the machine.

  5. To scan both sides of the document (MFC-L2750DW):
    • Press [2-sided Scan], and then select the document type.
    Option
    Description
    2-sided Scan: Long Edge
    2-sided Scan: Short Edge
  6. Select the scan settings you want to change:
    • [Resolution]
    • [File Type]
    • [Scan Type]
    • [Document Size]
    • [Scan Settings]
    • [ADF Auto Deskew] (available for certain models)
    • [Remove Background Colour]

      (available only for the [Colour] and [Grey] options.)

  7. Press [OK].
  8. Press [Start].
    The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

Related FAQs

Related Models

DCP-L2510D, DCP-L2512D, DCP-L2530DW, DCP-L2532DW, DCP-L2537DW, DCP-L2550DN, DCP-L2551DN, DCP-L2552DN, MFC-L2710DN, MFC-L2710DW, MFC-L2712DN, MFC-L2712DW, MFC-L2730DW, MFC-L2732DW, MFC-L2750DW, MFC-L2751DW, MFC-L2752DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit