MFC-9840CDW
 |
FAQs & Troubleshooting |
MFC-9840CDW
Date: 15/05/2013 ID: faq00000712_004
How do I check if the machine has faxes in its memory when it has a mechanical problem?
You can check if your machine has faxes in memory if one of the following messages is displayed on the LCD:
- Init Unable XX
- Print Unable XX
- Scan Unable XX
- Fuser Error
-
Press Menu on the control panel and choose Service => Data Transfer => Fax Transfer.
-
If the LCD shows No Data, there are no faxes left in the machine's memory.
If the LCD shows Enter Fax No., there are faxes in the machine's memory.
-
You can transfer the faxes to another machine.
Please refer to the instructions, "How can I forward a fax to another fax machine when my machine has a mechanical problem?". -
You can transfer the faxes to your PC.
Please refer to the instructions, "Can I transfer faxes to the PC when my machine has a mechanical problem?".
MFC-9440CN, MFC-9450CDN, MFC-9840CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.