FAQs & Troubleshooting

Close

HL-L5200DW(T)

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-L5200DW(T)

Not your product?

Date: 03/03/2016 ID: faq00003168_009

Unpack your Brother machine

Follow the steps below to unpack the machine:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Open the box.
            
    Open the box
         
  2. Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
             
    Remove Quick Setup Guide
          
  3. Remove the power cord.
              
    Remove small components
           
  4. Remove the packing foam.
               
    Remove the packing foam
                 
  5. Lift the machine out of the box.
                 
    Lift the machine out of the box.
                
  6. Remove the plastic bag and the tape.
                     
    Remove the plastic bag and the tape.
                                  
  7. Open the front cover.
                
    Open the front cover.
                   
  8. Remove the packing material.
                 
    Remove the packing material.
       
  9. Remove the drum unit and toner cartridge assembly.
         
    Remove the drum unit.
     
  10. Place the drum unit and toner cartridge assembly  on a clean, flat surface.
     
    Place the drum unit on a clean, flat surface with a piece of disposable paper underneath.
     
  11. Remove the orange packing material.
      
    Remove the orange packing material.
     
  12. Install the drum unit and toner cartridge assembly back into the machine.
     
    Install drum unit and toner cartridge assembly back into the machine.
     
  13. Close the front cover.
       
    Close the front cover.
     
  14. Pull the paper tray out of the machine.
      
    Pull the paper tray out of the machine.
     
  15. Take out the packing material from the paper tray.
       
    Take out the packing foam from the paper tray.
     
  16. Push the paper tray completely into the machine.
      
    Push the paper tray completely into the machine.
     

Related FAQs

Related Models

HL-L5000D, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.