HL-2460
 |
FAQs & Troubleshooting |
HL-2460
Date: 27/01/2014 ID: faq00000696_003
JAM REAR (at paper exit)
|
If a paper jam occurs at paper exit, follow steps below:
-
Open the top cover of the printer.
-
Slowly pull the jammed paper from the paper exit with both hands.
-
Close the top cover of the printer.
If a paper jam occurs behind the face up output tray before the paper exits, follow steps below:
- Open the top cover of the printer.
If a duplex unit is installed on the printer, remove it from the printer. After removing the jammed paper, re-install the duplex unit onto the printer.
-
Open the face up output tray.
-
Slowly remove the jammed paper with both hands.
- Close the face up output tray.
-
Close the top cover of the printer.
HL-2460
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.