FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

HL-2460

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 27/01/2014 ID: faq00000308_003

JAM INSIDE (inside the printer)

JAM INSIDE
.

 

After you have just used the printer, some parts inside the printer are extremely hot. When you open the front cover of the printer, never touch the fuser or the fixing roller.

 

If a paper jam occurs inside the printer, follow steps below:

 
  1. Open the top cover of the printer.

     

  2. Remove the toner cartridge.

     

  3. Lift up the metal plate inside the printer.

     

    • After having removed the jammed paper, if the printed page has toner stains, print several test pages before restarting your print job.
    • Remove the jammed paper carefully so you do not spread toner.
    • Take care not to stain your hands and clothes with toner. Wash toner stains immediately with cold water.
    • Never touch the transfer roller.
     
  4. Slowly pull out the jammed paper from inside the printer with both hands.

     

  5. Push the metal plate down.

     

  6. Install the toner cartridge firmly into the printer.

     

  7. Close the top cover of the printer.

     

    If a paper jam occurs when using A6 size paper, remove the jammed paper, turn over the stack of the paper in the paper cassette, and print it again.

     
 

Related Models

HL-2460

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.