How do I factory reset the print server?
If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps:
Turn off the printer.
Make sure that the front cover is closed and the power cord is plugged in.
Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off.
Press the Go button six times. Make sure that all the LEDs light up to indicate the print server has been reset to its default factory setting.
If you need further assistance, please contact Brother customer service:
Please note this form is used for feedback only.