HL-1210WE
 |
FAQs & Troubleshooting |
HL-1210WE
Date: 25/07/2014 ID: faq00000105_035
Reset the network settings to the factory default
You can use your machine's On/Off button to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3, or Web Based Management.
-
Make sure the power cord is plugged in, the top cover is closed and the machine is turned off.
-
While holding down
(Power On/Off), open and close the top cover.
-
Release
(Power On/Off). Make sure that all the LEDs turn off.
-
Press
(Power On/Off) six times.
The machine will restart.
HL-1210W, HL-1210WE, HL-1210WR, HL-1212W, HL-1212WE, HL-1212WR, HL-1222WE, HL-1223WE, HL-1223WR
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.