FAQs & Troubleshooting

Close

PE-400D

FAQs & Troubleshooting

FAQs & Troubleshooting

PE-400D

Not your product?

Date: 07/04/2009 ID: faqh00000010_000

Fabrics and stabilizer material for embroidery

Fabrics and stabilizer material for embroidery

 

Fabric Stabilizer material Reference
Type Material Top surface of fabric Underside of fabric

Medium weight fabrics Shirt/Apron

Cotton

Not required.

 Attach a stabilizer by ironing. 　

Thick fabrics
Jeans/Jumper

Denim
Quilting

Not required.

 Attach a stabilizer by ironing.

It's better to place a stabilizer material on the top surface of fabric when you sew quilting.

Thin fabrics
Curtain/Liner

Georgette
Organdy

Place a stabilizer on.

 Attach a stabilizer by ironing.

Temperature of iron should be "low".

Stretch fabrics
Sweatshirt/Vest

Knit
Jersey

Place a stabilizer on.

 Attach a stabilizer by ironing. 　

Towel cloth Towel

Towel
(pile)

Place a stabilizer on.

Place a stabilizer material under a fabric without attaching it and then hoop the fabric and the stabilizer together.

Caution:
If you attach stabilizer material to towels etc. by ironing, loops of the fabric might be expanded when removing the stabilizer.


 

  • Even though "Not required" is mentioned in the above list, use a stabilizer material for more attractive embroidery result if necessary.

Related Models

Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 770E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V3 SE, Innov-is V5, Innov-is V5 LE, Innov-is V7, PE-150V, PE-180D, PE-190D, PE-300S, PE-400D, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SuperGalaxie 3000/3000C/3000D/3100D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit