FAX-1560
FAQs & Troubleshooting |
FAX-1560
Date: 02/07/2007 ID: faq00002209_001
How do I register additional cordless handsets?
You can register up to 3 additional cordless handsets for a total of 4 cordless handsets to the machine (base unit). The cordless handset that was included with your machine (base unit) is already registered (Base1). You can also register the cordless handset to 3 other base units.
- Do one of the following:
For non-Colour LCD models:
Press Menu, Initial Setup, Register Handset on the control panel of the machine (base unit).
For Colour LCD models:
1.Press Menu on the control panel of the machine (base unit).
2.Press the up or down arrow key to choose Initial Setup. Press OK.
3.Press the up or down arrow key to choose Register Handset. Press OK.
4.Press the up or down arrow key to choose Register. Press OK.
- Press Menu/OK on the control panel of the cordless handset.
- Press the up or down arrow key to choose Register HS. Press Menu/OK.
- Press the up or down arrow key to choose BASE1, BASE2, BASE3 or BASE4. Press Menu/OK. The cordless handset searches for the machine (base unit).
- Enter a 4-digit number for the password of the machine (base unit). Press Menu/OK. You will hear one long beep when the cordless handset is registered correctly.
- If you hear three short beeps, the cordless handset did not register. Repeat steps 2 to 5.
- If you want to install another cordless handset, repeat steps 2 to 5.
- Press Off button.
FAX-1560, MFC-845CW, MFC-885CW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.