FAQs & Troubleshooting

Close

DCP-L6600DW

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-L6600DW

Not your product?

Date: 12/04/2016 ID: faq00000208_502

Clean the Corona Wire

If you have print quality problems or the control panel displays [Drum !] status, clean the corona wire.

  1. Open the front cover.
  2. Remove the toner cartridge and drum unit assembly from the machine.
  3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
    Be sure to return the tab to the Home position (). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe.
  4. Install the toner cartridge and drum unit assembly back into the machine.
  5. Close the front cover of the machine.

Related Models

DCP-L5500DN, DCP-L6600DW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.