FAQs & Troubleshooting

Close

DCP-L6600DW

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-L6600DW

Not your product?

Date: 18/12/2017 ID: faq00100222_001

Create a Self-signed Certificate

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:
    http://192.168.1.2
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
      - For example:
        http://SharedPrinter
      If you enable a NetBIOS name, you can also use the node name.
      - For example:
        http://brnxxxxxxxxxxxx
      The NetBIOS name can be found in the Network Configuration Report.
    • For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
  3. Type a password if you have set one, and then click Right Arrow.
  4. Click the Network tab.
  5. Click Security.
  6. Click Certificate.
  7. Click Create Self-Signed Certificate.
  8. Enter a Common Name and a Valid Date.
    • The length of the Common Name is less than 64 bytes. Enter an identifier, such as an IP address, node name, or domain name to use when accessing this machine through SSL/TLS communication. The node name is displayed by default.
    • A warning will appear if you use the IPPS or HTTPS protocol and enter a different name in the URL than the Common Name that was used for the self-signed certificate.
  9. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit).
  10. Select your setting from the Digest Algorithm drop-down list. The default setting is SHA256.
  11. Click Submit.
  12. Click Network.
  13. Click Protocol.
  14. Click HTTP Server Settings.
  15. Select the certificate you want to configure from the Select the Certificate drop-down list.
  16. Click Submit.
    The following screen appears.
    HTTP Server Settings
  17. Click Yes to restart your print server.

    The self-signed certificate is created and saved in your machine's memory.
    To use SSL/TLS comunication, the self-signed certificate must be installed on your computer.

Related FAQs

Related Models

DCP-L5500DN, DCP-L6600DW, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit