PT-D800W

FAQs & Troubleshooting

PT-D800W

Date: 10/04/2018 ID: faqp00100269_000

How to use Auto Power-Off Time

You can specify the auto power-off time in 2 ways.
Also, you can specify the setting for each case of using the AC adapter and using the Li-ion battery.

Using the Printer Setting Tool (For all models)

For Windows:
Use the Device Settings in the Printer Setting Tool on your computer.
For starting the Printer Setting Tool, refer to the FAQ: “Using the Printer Setting Tool"
For using the Device Settings, refer to the FAQ: “Using the Device Settings (for Windows)"

For Mac OS X (D800W / E800W only):
Use the Printer Setting Tool on your computer.
For using the Printer Setting Tool, refer to the FAQ: “Using the Printer Setting Tool (for Mac)"

Using your printer’s keyboard (For models equipped with the keyboard)

Select [Settings] in the Home screen using the , , or key, and then press the OK or Enter key.
Select [Auto Power Off] using the or key, and then press the OK or Enter key.
Select [AC Adapter] or [Li-ion Battery] using the or key and set the value using the or key.
Press the OK key.

Available settings:

Setting	Value	Setting	Value
AC Adapter	Off (None)	Li-ion Battery	Off (None)
	10 min		10 min
	20 min		20 min
	30 min		30 min
	40 min		40 min
	50 min		50 min
	1 h		1 h
	2 h
	4 h
	8 h
	12 h

If you connect the AC adapter to the printer after you specified "Auto Power Off", the machine uses the "AC Adapter" setting.
The default value is "1 h" for the AC adapter and "30 min" for the Li-ion battery.

Related Models

PT-D800W

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit