FAQs & Troubleshooting


Model discontinued. This page is no longer updated.


FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 25/03/2008 ID: faqp00000118_000

Why can't I load the tape cassette?

  • First, please make sure that you load the cassette in a correct direction.

  • If you still can't load it, a tape feed roller and  print head may be touching each other inside your printer. Please follow the steps below:

    1. Open the back cover.

    2. Check if the roller colored in gray in the image above and the print head which is a silver bar with a white piece of plastic attached are touching each other.

      There should be a gap about 1/8 inches (3.1 mm) between them for the ink ribbon in the tape cassette to go through. If they are touching each other, the tape cassette cannot be installed.

    3. If they are touching, gently push away the roller from the print head, and try loading the tape cassette.

Related Models


If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.