RJ-3055WB
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/rj3055wbeuk.jpg)
RJ-3055WB
Date: 29/01/2021 ID: faqp00100528_000
Enable or disable Bluetooth Low Energy (BLE)
Bluetooth connection is not available for Mac.
Follow the steps below to enable or disable Bluetooth Low Energy (BLE):
For TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:
To use Bluetooth®, an optional WLAN/BT Interface (PA-WB-001) is required.
-
Start the BPM (Brother Printer Management Tool).
You can download the BPM from the [Downloads] section of this website.-
For RJ-2035B / 3035B, TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:
You do not need to perform Step 2. Go to Step 3. - The BPM does not support the Bluetooth connection. We recommend connecting the printer to your computer via USB or Wi-Fi. For details about how to connect, see the FAQ: "How to connect the printer to your computer".
-
For RJ-2035B / 3035B, TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:
-
Check whether the Bluetooth®/Wi-Fi® module's current firmware supports BLE:
- Select your printer and click Printer Configuration.
-
Click the Wi-Fi tab and check the Wi-Fi version.
- If the version is 3.7.1.0 or later, the printer can already use BLE. Go to Step 3.
- If the version is 3.5.1.1, update the Bluetooth/Wi-Fi module's firmware. See "Update the Bluetooth/Wi-Fi module's firmware to use Bluetooth Low Energy (BLE)".For the following models, make sure you use the correct firmware version:
Model Firmware Version TD-4650TNWB / 4750TNWB / 4650TNWBR / 4750TNWBR V1.04.S18 or later RJ-2055WB / 3055WB B1.00.Q28 or later
- Select your printer and click Command Tool.
-
Type the following commands and press the Enter key, and then click Send.
If you fail to press the Enter key before clicking Send, the commands will not be executed.
Enable Bluetooth Low Energy (BLE)TD-4650TNWB / 4750TNWB / 4650TNWBR / 4750TNWBR, RJ-2055WB / 3055WB
TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:BT MODE "BT4.0"
WLAN MODULE SAVECFG
DELAY 20000
INITIALPRINTERWait for about 15 seconds for the printer to restart automatically.
BT MODE BT4.0
SET BTLINKBACK OFFWhen BLE is enabled, the automatic Bluetooth reconnection between your iOS/iPadOS device and the printer will be disabled.
TD-4650TNWB / 4750TNWB / 4650TNWBR / 4750TNWBR, RJ-2055WB / 3055WB
TJ-4420TN / 4422TN / 4520TN / 4522TN / 4620TN:BT MODE "BT2.1"
WLAN MODULE SAVECFG
DELAY 20000
INITIALPRINTERWait for about 15 seconds for the printer to restart automatically.
BT MODE BT2.1
SET BTLINKBACK ONBT MODE BT2.1 Restart the printer.
RJ-2035B, RJ-2055WB, RJ-3035B, RJ-3055WB, TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR, TJ-4420TN, TJ-4422TN, TJ-4520TN, TJ-4522TN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.