FAQs & Troubleshooting

Close

TJ-4121TN

FAQs & Troubleshooting

FAQs & Troubleshooting

TJ-4121TN

Not your product?

Date: 28/10/2020 ID: faqp00100512_001

How to install the Windows driver via Wi-Fi®/ wired network

  • To use Wi-Fi, an optional Wi-Fi Interface (PA-WI-002) is required.
  • Make sure both your wireless access point/router's and your printer's network settings are correctly set up.
    For more information, see the documentation provided with your wireless access point/router, or contact the router manufacturer, your system administrator, or Internet service provider.

Install the optional Wi-Fi Interface PA-WI-002 (for Wi-Fi connection)

 

Follow the steps below to attach the optional Wi-Fi Interface (PA-WI-002) before connecting to Wi-Fi.

The optional Wi-Fi Interface (PA-WI-002) consists of the following items.


PA-WI-002

 

1. PA-WI-002

2. Antenna

3. Spare Screw (× 2)

  1. Remove the cover.
    Remove the cover
  2. Install the PA-WI-002.
    Install the PA-WI-002
  3. Install the antenna.
    Install the antenna

 

Install the Windows driver via Wi-Fi/wired network

 

For details on how to install the driver, refer to the following.

For Wi-Fi connection: See "Wi-Fi® Network Connection (Windows)" in the FAQ: "How to connect the printer to your computer".
For wired network connection: See "Wired Network Connection (Windows)" in the FAQ: "How to connect the printer to your computer".

Related Models

TJ-4005DN, TJ-4020TN, TJ-4021TN, TJ-4021TNR, TJ-4120TN, TJ-4121TN, TJ-4121TNR

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit