PT-P950NW
 |
FAQs & Troubleshooting |
PT-P950NW
Date: 21/10/2020 ID: faqp00001282_003
How can I reset the printer?
You can reset the printer settings in two ways: resetting all the settings or resetting communication settings only.
Resetting all the settings
- Turn off the printer.
-
Hold down the
(Power) and 
(Feed&Cut) buttons for more than three seconds.
-
The
(Status) indicator flashes in green and the 
(Power) indicator lights in orange.
-
The
-
Continue holding down the (Power) button, and press the (Feed&Cut) button six times.
-
The (Power) indicator flashes three times in orange and the (Status) indicator flashes three times in green.
- All printer settings will be reset to the factory settings.
-
The
Resetting the communication settings
- Turn off the printer.
-
Hold down the (Power) and (Feed&Cut) buttons for more than three seconds.
-
The (Status) indicator flashes in green and the (Power) indicator lights in orange.
-
The
-
Continue holding down the (Power) button, and press the (Feed&Cut) button two times (for APIPA On) or four times (for APIPA Off).
-
The (Power) indicator flashes three times in orange and the (Status) indicator flashes three times in green.
- The communication settings will be reset to the factory settings.
-
The
PT-P900W/P900Wc, PT-P950NW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.