CS10s
FAQs & Troubleshooting |
CS10s
Date: 27/08/2020 ID: faqh00101510_003
Outline of viewing the LCD Screen
When the machine is turned on, the LCD will light up and the following screen is displayed.
No. | Item Name | Explanation | |||||||||||||||
(1) | Stitch number | Shows the number of the currently selected stitch pattern. | |||||||||||||||
(2) | Presser foot |
Shows the symbol for the presser foot to be used. Before sewing, attach one of the presser feet shown here.
* The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the screen. |
|||||||||||||||
(3) | Stitch length |
Shows the stitch length of the currently selected stitch pattern. When is displayed around , the stitch length is set to the default value. |
|||||||||||||||
(4) | Stitch width |
Shows the stitch width of the currently selected stitch pattern. When is displayed around , the stitch width is set to the default value. |
|||||||||||||||
(5) | Needle stop position |
Shows whether the needle stop position is set to the lowered position or the raised position.
|
|||||||||||||||
(6) | Needle mode (single needle / twin needle) |
CS10s, CS120WTs, CS70s, CX70PEs, DS120x, DS50, DX70SE, FS20s, FS40s, FS40WTs, FS45E, FS60x, FS70E, FS70WTx, KD40s, KE20s, SH40, ST55E, STYLE600, X40s
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.