SAPPORO
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_sapporoeuk.jpg)
SAPPORO
Date: 03/04/2023 ID: faqh00000477_007
How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)
When sewing gathers or darts, you can draw up the lower thread by hand so that some thread will be left over.
Before you draw up the lower thread, put the bobbin back in.
-
Turn off the machine.
-
Raise the presser foot lever.
(1) Presser foot lever
-
Remove the bobbin cover.
(1) Bobbin cover
-
Reinstall the bobbin.
-
Pass the thread along the slit in the direction of the arrow, and leave it there without cutting it.
-
While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle.
-
Pull on the upper thread to draw up the lower thread.
(1) Upper thread
(2) Lower thread -
Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.
(1) Upper thread
(2) Lower thread -
Replace the bobbin cover.
(1) Groove
(2) Projection
Related FAQs
ArtCity 190, SAPPORO
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.