Innov-is 500D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inov500deuk.jpg)
Innov-is 500D
Date: 31/03/2016 ID: faqh00000121_000
"Winding bobbin thread." message appearing on the LCD. What does it mean?
The bobbin winder is winding the bobbin.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
-
For a correct operation
One beep is sounded. -
If an incorrect operation is performed
Two or four beeps are sounded. -
If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to embroider.
CS-8120, Innov-is 1200, Innov-is 1250, Innov-is 350SE, Innov-is 400, Innov-is 450, Innov-is 500, Innov-is 500D, Innov-is 550SE/ 550, Innov-is 600, Innov-is 650, Innov-is 670, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 770E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, NX-400Q/400, NX-600, PE-150V, PE-180D, PE-190D, QS-480 Quilter's Edition, QS-960 Quilter's Edition
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.