DCP-T420W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcpt420w_all.jpg)
DCP-T420W
Date: 09/03/2022 ID: faq00100767_000
I want to connect my Brother machine to a wireless network using WPS (Wi-Fi Protected Setup™)
If you have a wireless access point/router supporting WPS, you can easily connect your Brother machine to your wireless network by following the steps below.
Make sure your wireless access point/router supports WPS. For more information, refer to the user’s guide provided with your wireless access point/router.
Configure the wireless settings:
- Make sure the power cord is plugged the top cover is closed.
-
Press
(Power /On/Off) to turn the machine on and check that the power button LED lights up.
-
Press
or
(the WiFi button) three times on your machine.
-
Press and hold the WPS button on your wireless access point/router.
This step describes the most common method of setting up wireless connection using WPS.
The WPS button location and operation may vary depending on your wireless access point/router. Please check its user's guide for detailed instructions.
- If you have successfully connected your Brother machine to your wireless network, the WiFi LED lights up.
Wireless setup is now complete.
DCP-J1200W(E), DCP-T420W, DCP-T425W, DCP-T426W
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.