MFC-L2751DW
FAQs & Troubleshooting |
MFC-L2751DW
Date: 31/01/2022 ID: faq00100513_500
Print a Transmission Verification Report
There are several settings available for the Transmission Verification Report:
On | Prints a report after every fax you send. |
On (+Image) | Prints a report after every fax you send. A portion of the fax’s first page appears on the report. |
Error only | Prints a report if your fax is unsuccessful due to a transmission error. Error only is the factory setting. |
Error only (+Image) | Prints a report if your fax is unsuccessful due to a transmission error. A portion of the fax’s first page appears on the report. |
Off | Your Brother machine does not print any reports after sending faxes. |
MFC-L2710DN/MFC-L2710DW
- Press Menu.
- Press or to display the [Fax] option, and then press OK.
- Press or to display the [Report Setting] option, and then press OK.
- Press or to display the [XMIT Verify] option, and then press OK.
- Press or to display the [Error Only], [ErrorOnly+Image], [Off], [On (+Image)], or [On (+Image)] option, and press OK.
- Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW
- Press .
- Press or to select the option you want.If you select [On+Image] or [Error only (+Image)], the image will not appear on the Transmission Verification Report if Real Time Transmission is set to [On].
- Press .If the transmission is successful, OK appears next to RESULT on the Transmission Verification Report. If the transmission is not successful, NG appears next to RESULT.
MFC-L2710DN, MFC-L2710DW, MFC-L2712DN, MFC-L2712DW, MFC-L2730DW, MFC-L2732DW, MFC-L2750DW, MFC-L2751DW, MFC-L2752DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.