MFC-L2710DN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl2710dn_eu.jpg)
MFC-L2710DN
Date: 10/01/2020 ID: faq00100264_002
Dial Restriction for Fax sending.
This function prevents transmission to the wrong destination and restrict sending a fax by manual dialing.
For example, you can prevent transmission to the wrong destination by requiring the user to enter the fax number twice, or you can prevent private use of fax by requiring using the One Touch Dial.
Available options in Dial Restriction
Available options in Dial Restriction
For each method of specifying the destination listed below, you can require entering the destination twice or restrict using the method by turning Dial Restriction on to prevent wrong fax transmission. (Available options to specify destinations may differ depending on the Brother machine being used.)
- Dial Pad : Entering manually using the dial pad.
- One Touch Dial : Specifying from the One Touch Dial.
- Speed Dial : Specifying from the Speed Dial.
If you select Enter # twice
When the user presses Start, the machine will ask the user to re-enter the destination. After the user enters the same destination again and presses Start, a fax will be sent.
If you select On
The user cannot use the method to specify the destination.
How to set Dial Restriction
There are two ways to set up Dial Restriction using Web Based Management or machine's control panel.
The following shows how to set Dial Restriction using Web Based Management as an example.
Setup Dial Restriction using Web Based Management
-
Access Web Based Management.
> Click here to see how to access Web Based Management.
-
If you have previously set your own password, go to STEP3.
If you have not previously set your own password, change the default login password.
> Click here to how to change the password.
-
Click the Fax tab and select Dial Restriction in the left navigation bar.
-
Set the option for each method of specifying the destination such as Dial Pad, One Touch Dial and Speed Dial as needed and then click Submit.
Off...The user can use the method to specify the destination.
Enter # twice...The machine will ask the user to re-enter the fax number or specify the destination. In Dial Pad, after re-entering the same number, the machine will start dialing. In One Touch Dial or Speed Dial, after specifying the same destination with the same method, the machine will start dialing.
On...The user cannot use the method to specify the destination.
- Close the Web Based Management. The setting is now completed.
You can also setup using machine's control panel. If you do not want users to change the settings, turn the Setting Lock on.
MFC-B7710DN, MFC-B7715DW, MFC-L2710DN, MFC-L2710DW, MFC-L2712DN, MFC-L2712DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.