MFC-J265W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj265w_all.jpg)
MFC-J265W
Date: 18/06/2010 ID: faq00002610_001
I'm having trouble reading the information on my Brother machine's LCD. How can I adjust the LCD's contrast and brightness?
If you are having difficulty reading the Brother machine's LCD, you can adjust its contrast and brightness by following these procedures:
Procedure 1: Changing the LCD Contrast setting
Procedure 2: Changing the Backlight Brightness setting
(This option may not appear depending on the model of your Brother machine.)
Procedure1: Changing the LCD Contrast setting
- Press Menu.
- Press the Up or Down Arrow key to choose General Setup.
- Press OK. (For touchscreen models, skip this step.)
- Press the Up or Down Arrow key to choose LCD Settings.
- Press OK. (For touchscreen models, skip this step.)
- Choose LCD Contrast and then choose Light, Med, or Dark.
- Press OK. (For touchscreen models, skip this step.)
- Press Stop/Exit.
Procedure 2: Changing the Backlight Brightness setting
(This option may not appear depending on the model of your Brother machine.)
- Press Menu.
- Press the Up or Down Arrow key to choose General Setup.
- Press OK. (For touchscreen models, skip this step.)
- Press the Up or Down Arrow key to choose LCD Settings.
- Press OK. (For touchscreen models, skip this step.)
- Choose Backlight.
- Do one of the following (The menu varies on your model.):
- Choose Light, Med, or Dark.
- Press the Left Arrow key to make the backlight darker or press the Right Arrow key to make the backlight lighter.
- Press OK. (For touch screen models, skip this step.)
- Press Stop/Exit.
DCP-383C, DCP-385C, DCP-387C, DCP-395CN, DCP-585CW, DCP-6690CW, DCP-J125, DCP-J315W, MFC-250C, MFC-255CW, MFC-257CW, MFC-290C, MFC-295CN, MFC-297C, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-6890CDW, MFC-790CW, MFC-990CW, MFC-J220, MFC-J265W, MFC-J410, MFC-J415W
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.