HL-1110R
FAQs & Troubleshooting |
HL-1110R
Date: 13/03/2013 ID: faq00002256_018
Clean the Drum Unit.
Please follow the steps below to clean the drum unit:
- Open the top cover.
- Slowly take out the drum unit and toner cartridge assembly.
- Push down the lock lever (1) and take the toner cartridge out of the drum unit (2).
- Turn the drum unit gear by hand while looking at the surface of the drum roller (1).
- Wipe the surface of the drum gently with a dry cotton swab until the dust of glue on the surface comes off.
- Put the toner cartridge back into the drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically.
- Put the drum unit and toner cartridge assembly back into the machine.
- Close the top cover.
HL-1110, HL-1110E, HL-1110R, HL-1112, HL-1112E, HL-1112R, HL-1202R, HL-1210W, HL-1210WE, HL-1210WR, HL-1212W, HL-1212WE, HL-1212WR, HL-1222WE, HL-1223WE, HL-1223WR
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.