DCP-J4110DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcpj4110dw_eu_as.jpg)
DCP-J4110DW
Date: 13/12/2022 ID: faq00000253_023
Is there a way to view how much ink is remaining?
You can check the ink status by running the Status Monitor (Status Monitor is installed automatically when installing the MFL-Pro Suite Software) or from the control panel. Follow the steps listed below to check the ink status.
NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.
1. Check the ink status from the control panel
-
Press
(Settings).
- Press the Up or Down arrow key to display General Setup.
- Press General Setup.
-
Press Ink.
If
is on the Touchscreen, you can press it, and then go to Step 5.
- Press the Up or Down arrow key to display Ink Volume.
- Press Ink Volume. The Touchscreen shows the ink volume.
-
Press
.
2. Check the ink status from the Status Monitor utility
*Windows users:
Open the Status Monitor. (Click here to see how to start Status Monitor.)
*Mac OS X users:
Open the Status Monitor. (Click here to see how to start Status Monitor.)
3. Check the ink status from the ControlCenter
*Windows users:
Open the ControlCenter.
-
Brother Utilities supported models
-
Open Brother Utilities.
-
Windows 7 / 10 / 11
Clickor
(Start) > (All Programs or All apps >) Brother > Brother Utilities.
-
Windows 8
On the Start screen, click.
If is not on the Start screen, right-click somewhere on an empty spot, and then click, All Apps from the bar.
Click Brother Utilities.
-
Windows 7 / 10 / 11
- Select Scan.
- Click ControlCenter4.
-
Open Brother Utilities.
-
Brother Utilities unsupported models
Click(Start) > All Programs > Brother > XXX-XXXX (your model name) > ControlCenter4.
<Home Mode>
<Advanced Mode>
*Mac OS X users:
-
Open the ControlCenter.
To open the ControlCenter2 application, click Go from the Finder bar, Applications > Brother > ControlCenter. Double click the ControlCenter.
The ControlCenter will open and an icon will be placed in the dock.
-
Click on DEVICE SETTINGS on the left options then click on Ink Level button.
DCP-J172W, DCP-J4110DW, MFC-J2310, MFC-J4410DW, MFC-J4610DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.