FAQs & Troubleshooting

Close

MFC-L3740CDW(E)

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-L3740CDW(E)

Not your product?

Date: 23/01/2023 ID: faq00000216_028

Colored spots at 75 mm (3.0 in.) intervals or at 29 mm (1.1 in.) intervals

Colored Spots


Follow the steps applicable for your case to resolve the issue:

 

Case 1: Colored spots at 75 mm (3.0 in.) intervals

  1. If the issue is not resolved after printing a few pages, the drum may have foreign material, such as glue from a label, stuck on the drum surface. Clean the drum unit.
    > Click here to see how to clean the drum unit.
  2. Install a new drum unit.
    > Click here to see how to replace the drum unit.

 

 

Case 2: Colored spots at 29 mm (1.1 in.) intervals

Identify the color causing the issue and install a new toner cartridge.

To identify the color of the toner cartridge and replace toner cartridge, follow the steps below:

 

  1. > Click here to print the chart. [345KB/ PDF]
  2. Compare your printed document with the printed chart to identify the color causing the issue.
  3. Replace the toner cartridge of the color.
    > Click here to see how to replace the toner cartridge.

Related Models

DCP-L3515CDW, DCP-L3520CDW(E), DCP-L3527CDW, DCP-L3555CDW, DCP-L3560CDW, HL-L3215CW, HL-L3220CW(E), HL-L3240CDW, HL-L8230CDW, HL-L8240CDW, MFC-L3740CDW(E), MFC-L3760CDW, MFC-L8340CDW, MFC-L8390CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.