HL-5240L
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl5240l_eu.jpg)
HL-5240L
Date: 10/05/2013 ID: faq00000216_005
White spots on black text and graphics or black spots appear at 94 mm (3.7 in.) intervals.
![](/g/b/img/faqend/faq00000216_005/eu_ot/en/91896/spots.gif)
If the problem is not solved after printing a few pages, the drum unit may have glue from the label stuck on the OPC drum surface.
Clean the drum unit as follows:
-
Put the print sample in front of the drum unit, and find the exact position of the poor print.
-
Turn the drum unit gear by hand while looking at the surface of the OPC drum (1).
-
When you have found the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off.
DO NOT clean the surface of the photosensitive drum with a sharp object.
Related FAQs
HL-5240, HL-5240L, HL-5250DN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.