FAQ & Fehlerbehebung

Schließen

DC100

FAQ & Fehlerbehebung

FAQ & Fehlerbehebung

DC100

Nicht Ihr Produkt?

Datum: 23.07.2018 Kennnummer: faqh00100965_000

E542 appears on the computer screen.

 

Error message

Failed to register calibration data. Please photograph again and make sure the dots are clearly captured.
Don’t capture any lights or shadows. (E542)

 

 

 

Causes / Solutions


Check the following.

 

Dos  Don'ts
  • Smooth out the calibration sheet before photographing.
  • Make sure that the calibration sheet is not dirty, wrinkled or folded before taking a photo.
  • If the calibration sheet is dirty, has marks, wrinkled or folded print a new copy and use the new copy to calibrate your chosen device.

    You can download the calibration sheet  from this site, and print it with your printer.
    Click here to download the Letter size. Click here to download the A4 size.
    It can also be downloaded by clicking [Print the calibration sheet.] on the DesignNCut Manager.
    image
  • Do not photograph a calibration sheet that is dirty, has marks, wrinkled or folded.
    image
  • Place the calibration sheet on a flat surface to photograph.
  
  • Make sure that the camera lens is clean and not dirty.
  • Set the picture size ratio of the camera as 4:3.
    If the setting is 16:9, change it to 4:3.
  • When taking a photo, do not zoom or use a flash.
  • Hold the device and make sure that it is level.
  • Do not misalign the device and sheet.
  • Do not take the photo at a far distance from the sheet.
  • Do not take the photo too close to the sheet.

    image
  • Make sure to capture all of the dots on the calibration sheet and nothing else.
  
  • When photographing, make sure that there are no objects or shadows on the calibration sheet.
  • Do not photograph under a bright light.



 

Relevante FAQ

Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:

Rückmeldung zum Inhalt

Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?

Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.

Senden