MFC-J5945DW
FAQ & Fehlerbehebung |
MFC-J5945DW
Datum: 17.10.2018 Kennnummer: faq00100476_004
Telephone Line Interference/VoIP.
If you are having issues sending or receiving a fax due to possible interference on the telephone line or if you are using a VoIP system, we recommend changing the modem speed to minimise errors in fax operations.
-
Press (Settings) > All Settings > Initial Setup > Compatibility.
-
Press the option you want.
-
Basic(for VoIP) reduces the modem speed to 9,600 bps and turns off color fax receiving(*) and Error Correction Mode (ECM), except for color fax-sending(*). Unless interference is a recurring issue on your telephone line, you may prefer use it only when needed.
To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to Basic(for VoIP).
*: Available only for Brother machines with color fax function
-
Normal sets the modem speed at 14,400 bps.
- High set the modem speed at 33,600 bps.
-
Basic(for VoIP) reduces the modem speed to 9,600 bps and turns off color fax receiving(*) and Error Correction Mode (ECM), except for color fax-sending(*). Unless interference is a recurring issue on your telephone line, you may prefer use it only when needed.
- Press (Home).
- VoIP (Voice over IP) is a type of phone system that uses an Internet connection, rather than a traditional phone line.
-
(For some coutries)
Brother does not recommend the use of a VoIP line. VoIP limitations in general can cause some functions of the fax machine not to work correctly.
MFC-J5740DW, MFC-J5945DW, MFC-J5955DW, MFC-J6540DW(E), MFC-J6940DW, MFC-J6945DW, MFC-J6947DW, MFC-J6955DW, MFC-J6957DW, MFC-J6959DW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.