HL-1650
![]() |
FAQ & Fehlerbehebung |
![](/g/b/img/product/hl1650_all.jpg)
HL-1650
Datum: 28.09.2011 Kennnummer: faq00002132_001
DX LEVER ERROR
The duplex unit on your printer can be set to work with either A4 or Letter sized paper. If your PC software is not configured in the same way as the lever position, you will see the DX LEVER ERROR message when you try to print in 2-sided(duplex) mode. Check that your printer driver and software is set to the same position as the lever, or if the lever is not set correctly, change its position. Please note that the lever is located to the rear of the printer just below the silver serial number sticker.
HL-1650, HL-1670N, HL-1850, HL-1870N
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.