MFC-9340CDW
Nejčastější dotazy a pokyny pro odstraňování potíží |
MFC-9340CDW
Datum: 27/02/2013 ID: faq00002784_015
Scan a document and save the scanned image to a folder on a local or network hard disk using the Scan button on my Brother machine
You can scan a document and save the scanned image to a preferred folder by pressing the Scan button on the control panel of your Brother machine.
If you want to change the scan settings, click here to see how to change scan settings.
Follow the steps listed below.
- Load your document.
- For the Automatic Document Feeder (ADF), place the document face up top edge first.
- For the scanner glass, place the document face down.
- For the Automatic Document Feeder (ADF), place the document face up top edge first.
- Press (Scan).
- Swipe left or right to display (to File).
- Press (to File).
- Press OK.
- (For network users)
- Press the Up or Down arrow key to display the destination computer you want to send to.
Note:
If the computer is not displayed, click here to see how to solve the issue.
- Press the destination computer name.
- If the machine's display prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer, and press OK.
- Press the Up or Down arrow key to display the destination computer you want to send to.
- Do one of the following:
- To start scanning with the existing settings, go to Step 8.
- To change the settings,
- Press Options.
- Press the Set with Touch Panel option, and then press On.
- Select the scan setting you want to change.
- After making changes to settings, press OK and go to Step 8.
(These changes are only temporary. If you want to make permanent changes, use the ControlCenter software.)
- Press Options.
- To start scanning with the existing settings, go to Step 8.
- Press Start. The machine starts scanning.
You can scan from your computer with the useful application as ControlCenter. See the related FAQ's about how to use the ControlCenter with Windows/ Macintosh.
Související nejčastější dotazy
- Change the scan settings for scanning from ControlCenter2 or the SCAN key (For Macintosh)
- Change the scan settings for scanning from ControlCenter4 or the SCAN key (For Windows)
- Scan a document and save the scanned image to a folder on a local or network hard disk (For Macintosh)
- Scan a document and save the scanned image to a folder on a local or network hard disk (For Windows)
- I cannot find the destination computer on the network when I try to scan a document using the machine's Scan key or control panel.
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.