QL-720NW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lpql720nweas.jpg)
QL-720NW
Date: 22/10/2020 ID: faqp00001538_001
How do I switch to and use the mass storage mode?
The mass storage feature allows you to execute commands by sending data from a computer to the printer via USB. Files that have been copied to the printer's mass storage area are processed when you press the Wi-Fi button.
-
Confirm that the printer is turned off.
-
While holding down the Wi-Fi button, press and hold the power button.
When the Status and Wi-Fi lamps start to flash in green, release the Wi-Fi and power buttons.
-
Connect the computer to the printer via USB. The printer's mass storage area is displayed on the computer screen.
-
Drag and drop the file you want to copy to the mass storage area.
This feature supports ".bin" and ".blf" files. Do not use other file formats with this feature.
-
Press the Wi-Fi button. The command file is executed.
-
While the file is being executed, the Wi-Fi lamp lights in green.
-
After the file has been executed, the Wi-Fi lamp turns off.
-
To turn mass storage mode off, turn the printer off.
The printer will start up in its normal operating mode.
QL-720NW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.