JD2799
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_jd2799eas.jpg)
JD2799
Date: 15/10/2020 ID: faqh00101099_002
The bobbin thread cannot be pulled up.
-
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to How do I change the needle ?
-
Bobbin is set incorrectly.
Reset the bobbin thread correctly.
Refer to How do I install the bobbin wound with thread ?
-
Upper threading is incorrect.
Check the steps for threading the machine and rethread the machine correctly.
Refer to How do I thread my machine ?
Related FAQs
AS1430S, AS1450, AS2730S, BC-2100/BC-2100PRW, BC-2500, BC800, CS-6000/6000b/6000t, DS-120, DS1300, DS-140, GP60X, GS2500, GS2700, GS2750, GS2786K, GS2788, GS2788M, GS3700, GS3700L, GS3750, GS3786K, JA001, JA002, JA007, JD2799, JK17B, JS1400, JS1410, JX17, S90, TM27PK, X1100, XL5900, XT27, XT37, XT5800
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.