MFC-8510DN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc8510dn_eu_as_cn.jpg)
MFC-8510DN
Date: 08/05/2012 ID: faq00000312_028
Toner specks
Please check the following points to solve the problem:
- Make sure that you use paper that meets our specifications. Rough-surfaced paper may cause the problem.
Please refer to the FAQs "What kind of paper can I use?" and "What is the recommended paper?"
- Clean the corona wire and the drum unit.
Please refer to the FAQs "Clean the corona wire." and "Clean the drum unit."
- The drum unit may be damaged.
Put in a new drum unit. Please refer to the FAQ "REPLACE DRUM".
- The fuser unit may be contaminated. Please contact Brother Customer Service from "Contact Us"
DCP-7055, DCP-7057, DCP-7060D, FAX-2890, FAX-2990, HL-5440D, HL-5445D, HL-5450DN, HL-6180DW, MFC-7290, MFC-7360, MFC-7470D, MFC-7860DN, MFC-8510DN, MFC-8515DN, MFC-8520DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.