PS-9000
FAQ et Diagnostic |
PS-9000
Date: 23.12.2014 ID: faqp00000481_000
The "ping" command reports that I can communicate with the PS-9000, but I cannot print.
Check the following to identify the cause of the problem.
-
[There may be another device assigned with the same IP address, which may be responding to the "ping " command]
Check the IP address in "arp -a" command, after send to "ping" command.
Check the IP address of the devices on your network. If you find the duplicate IP addresses, assign a different IP address to one of the devices.
TIP"arp -a"To verify if this is the case, after you send the "ping" command, issue "arp -a" command, then, check the arp table to see if the target device has a proper combination of the IP address and Ethernet Address. If there is a duplicated IP address exists, in the "arp" table there will be an unmatched combination of the Ethernet address and associated IP addresses.
-
[Your printer driver on your PC may not be properly installed]
Check if the printer driver is properly installed.
If a printer port has not been assigned to the printer driver, set up the printer port using the Brother PS-9000 Utility. -
[Check if there is any security software function such as firewall in the server or another network device]
The security software function may be interrupting network communication with the product. Disable the function to see if the problem continues.
PS-9000, PS-9000, PT-9200DX, PT-9500PC, QL-1050, QL-1050N, QL-500, QL-500A, QL-550, QL-560, QL-650TD
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.