FAQ et Diagnostic

Fermer

Modèle retiré. Cette page n'est plus mise à jour.

PT-900

FAQ et Diagnostic

FAQ et Diagnostic

Date: 15.05.2020 ID: faqp00000848_003

How can I minimize the tape margin?

Please follow the steps below:
 

  1. Press F.  "- F -" appears on the LCD.
  2. Continue pressing F or Cursor until "MARGIN" is displayed.
  3. Press Enger.
  4. Press Cursor until "NARROW" is displayed.
  5. Press Enger to apply the setting.
  6. Press Print .
  7. Cut along the dots " : " with scissors so that the text is centered in the label.

25 mm margin that is produced prior to every label cannot be eliminated due to the construction of the tape mechanism. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

The following methods are useful for reducing tape use:

  • Using the "Numbering function" - please refer to "When I try to use Numbering function, an error occurs."
  • Setting the tape margin to "Chain" - please make sure that you press the feed button after the last label is printed, otherwise a part of the text may be cut off.

Modèles apparentés

PT-1000, PT-900

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: €Souhaitez-vous ajouter des commentaires?

Ce formulaire a pour seul but de nous faire part de vos commentaires.