FAQs & Troubleshooting

Close

HL-L2360DW

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-L2360DW

Not your product?

Date: 03/23/2016 ID: faq00000065_066

Replace Toner

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the toner cartridge and not the drum unit.
> Click here to see information for the difference between the toner cartridge and the drum unit.

> For the order number (Order No.) of the toner cartridge, click here to see the Consumables & Options page.

Follow the steps below to clear the Replace Toner message.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Make sure that the machine is turned on.
  2. Open the front cover.
    OpenFrontCover
  3. Remove the toner cartridge and drum unit assembly from the machine.
    RemoveTonerDrum
  4. Push down the lock lever and take the toner cartridge out of the drum unit.
    TakeTonerOutDrum
  5. Unpack the new toner cartridge and pull off the protective cover. Put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically.
    ReplaceNewToner
  6. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
    CleanColonaWire

    Be sure to return the tab to the Home position (HomePosition). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe.

  7. Install the toner cartridge and drum unit assembly back into the machine.
    InstallTonerDrum
  8. Close the front cover.
    CloseFrontCOver

Related FAQs

Related Models

HL-L2320D, HL-L2360DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.