Innov-is XE2
 |
FAQs & Troubleshooting |
Innov-is XE2
Date: 09/26/2019 ID: faqh00101113_001
How do I save an embroidery pattern to a USB flash drive?
When sending embroidery patterns from the machine to USB flash drive, plug the USB flash drive into the machine’s USB port.
- USB flash drive is commercially available, but some USB flash drive may not be usable with this machine. Please visit our website for more details.
- Depending on the type of USB flash drive being used, either directly plug the USB device into the machine’s USB port or plug the USB flash drive Reader/Writer into the machine’s USB port.
- The USB flash drive can be inserted or removed at any time.
-
Press
when the pattern you want to save is in the embroidering screen.
-
Insert the USB flash drive into the USB port on the machine.
Do not insert anything other than USB flash drive into the USB flash drive port. Otherwise, damage to the machine may result.
-
Press the key for the corresponding media.
* Press
to return to the original screen without saving.
* The pattern is saved in a folder labeled [bPocket].
>> The Saving… screen is displayed. When the pattern is saved, the display returns to the original screen automatically.
Do not insert or remove USB flash drive while Saving… screen is displayed. You will lose some or all of the pattern you are saving.
Innov-is XE2, Innov-is XJ1, Innov-is XJ2
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.