CE6070T
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_ce6070teus.jpg)
CE6070T
Date: 10/15/2020 ID: faqh00101099_002
The bobbin thread cannot be pulled up.
-
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to How do I change the needle ?
-
Bobbin is set incorrectly.
Reset the bobbin thread correctly.
Refer to How do I install the bobbin wound with thread ?
-
Upper threading is incorrect.
Check the steps for threading the machine and rethread the machine correctly.
Refer to How do I thread my machine ?
Related FAQs
BM2800, BM3730, CE1000, CE1010, CE-5000/5000PRW, CE5500T, CE6070T, CE6080T, CE6085T, CE8080/CE8080PRW, CP2410, CP-6500, CP-7500, CS-100T/4000/5000H, CS-6000/6000b/6000t/6000i, ES-2000/2000T, EX-660, H537ST, HC3010, HC7140, JX1400, JX1410, JX1420, JX1710, JX1714, JX2217, JX2417, LX3850, ND50E, SC9500, SQ9050, SQ9130, ST371HD, XB2510, XL2800, XM3710, XR37T, XR6060, XR-7700, XS6060, XS6070
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.