Innov-is XP1
 |
FAQs & Troubleshooting |
Innov-is XP1
Date: 09/19/2018 ID: faqh00100273_007
How do I adjust a stitch width or length?
When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length, and upper thread tension. However, if needed, you can change any of the individual settings.
- Settings for some stitches cannot be changed.
- If you turn off the machine or select another stitch without saving stitch setting changes , the stitch settings will return to their default settings.
Setting the Stitch Width
Follow the steps below when you want to change the zigzag stitch pattern width.
For an alternate method of changing the stitch width using the speed controller.
Example
Press  to narrow the zigzag stitch pattern width. |
|
Press |
 |
 |
|
|
>> The value in the display gets smaller. |
>> The value in the display gets bigger. |
to widen the zigzag stitch pattern width.
-
Press
to save the stitch settings. -
Press
to check changes made to the stitch. -
Press
to return the stitch width to the original setting.
After adjusting the stitch width, slowly rotate the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
Setting the Stitch Length
Follow the steps below when you want to change the zigzag stitch pattern width.
Example
| Press to shorten the stitch length. |
|
Press |
 |
 |
|
|
>> The value in the display gets smaller. |
>> The value in the display gets bigger. |
-
Press to save the stitch settings.
-
Press to check changes made to the stitch.
-
Press to return the stitch width to the original setting.
If the stitches get bunched together, lengthen the stitch length and continue sewing. Do not continue sewing without lengthening the stitch length. Otherwise, the needle may break and cause injury.
Setting the “L/R Shift”
Follow the steps below when you want to change the placement of the zigzag stitch pattern by moving it left and right.
Example
| Press to shift the stitch pattern to the left. |
|
Press |
 |
 |
|
|
>> The value in the display appears with a minus sign. |
>> The value in the display appears with a plus sign. |
-
Press to save the stitch settings.
-
Press to check changes made to the stitch.
-
Press to return the stitch width to the original setting.
After adjusting the L/R Shift, slowly rotate the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
Innov-is XP1, Innov-is XP2, Innov-is XP3
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.