FAQs & Troubleshooting

Close

Innov-is NQ1300PRW/ Innov-is NQ1300

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is NQ1300PRW/ Innov-is NQ1300

Not your product?

Date: 03/20/2015 ID: faqh00100072_001

How do I adjust the sensitivity of the operation keys?

The operation keys do not respond when you wear a glove, press with a fingernail or a non-electrostatic touch pen.

And also, you can adjust the sensitivity of the operation keys according to the following procedure.

image

 

image

(1) Operation keys

 

  • When using an electrostatic touch pen, make sure that its point is 8 mm or more. Do not use a touch pen with a thin point or a unique shape.
  • We recommend selecting the highest setting if an electrostatic touch pen is being used.

 

  1. Press image to display the settings screen.

     

  2. Display the image (Input Sensitivity) setting screen by pressing image or  image, and select it.

     

  3. Adjust the input sensitivity by pressing the image or image.
    The lower the setting, the less sensitive the keys will be; the higher the setting, the more sensitive the keys will be.

    image
     

 

If the machine does not respond when an operation key is pressed

 

Hold down image (Thread cutter button) and turn on the machine to reset the settings.
Display the settings screen, and then adjust the settings again.

 

Related Models

Innov-is NQ1300PRW/ Innov-is NQ1300, Innov-is NQ700PRW/ Innov-is NQ700, Innov-is NQ900PRW/ Innov-is NQ900

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.