Innov-is XP3
 |
FAQs & Troubleshooting |
Innov-is XP3
Date: 05/22/2023 ID: faqh00100040_015
How do I remove or attach the presser foot holder?
Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder.
-
Always touch
(Presser foot/Needle exchange key) on the screen to lock all keys and buttons before changing the presser foot. If 
(Presser foot/Needle exchange key) is not touched and the "Start/Stop" button or another button is pressed, the machine will start and may cause injury. - Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the needle may strike the presser foot and break, and may cause injury.
- Make sure that the presser foot is installed in the correct direction, otherwise the needle may strike the presser foot, breaking the needle and causing injuries.
-
Remove the presser foot.
For details, refer to "How do I remove or attach the presser foot?". -
Loosen the screw of the presser foot holder to remove the presser foot holder.
(1) Multi- purpose screwdriver
(2) Presser foot holder screw
(3) Presser foot holder -
Remove the presser foot holder.
-
Align the presser foot holder with the lower left side of the presser bar.
(1) Presser bar (2) Presser foot holder
-
Hold the presser foot holder in place with your right hand, and then tighten the screw using the screwdriver in your left hand.
(1) Multi- purpose screwdriver
(2) Presser foot holder screw
(3) Presser foot holderUse the included screwdriver to firmly tighten the screw. If the screw is loose, the needle may strike the presser foot and possibly cause injury.
Related FAQs
Innov-is XP1, Innov-is XP2, Innov-is XP3
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.