SDX225
FAQs & Troubleshooting |
SDX225
Date: 10/05/2018 ID: faqh00000719_002
Care and Maintenance (Cleaning Inside the Machine)
Cleaning Inside the Machine
If there are vertical lines or blank areas in the scanned image, lint or dust may have accumulated in the machine. The lint may also attach to the surface of the feed rollers, preventing a mat to be loaded or unloaded correctly. Use a soft brush to clean it.
-
Turn off the machine, unplug the power cord from the electrical outlet, and then disconnect the AC power cord from the AC power jack on the back of the machine.
-
Open the front tray cover.
-
Remove the holder from the carriage.
-
Use a commercially available brush to clean around the feed slot and the carriage.
SDX125, SDX125e, SDX125i, SDX225, SDX325, SDX85
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.