CM350
FAQs & Troubleshooting |
CM350
Date: 12/01/2015 ID: faqh00000706_001
Scanning cannot be done cleanly (there are lines in the scanned image).
Possible Causes (or Results)
Case1 : The scanner glass is dirty.
Case2 : The original to be scanned is dirty or scratched.
Solutions
----- Case1 -----
Clean the scanner glass from the bottom of the machine.
- While pushing in the tab at the bottom of themachine, pull up on the cover.
-
Dampen a soft lint-free cloth with water and firmly wring it out, and then wipe the scanner glass at the inside on the bottom of the machine.
>> For details, see “Cleaning the scanner glass”.
----- Case2 -----
In “Direct Cut” or “Scan to Cut Data” mode, remove thin lines or dirt in the image editing screen.
>> For details, see “Editing Pictures”.
CM350, CM650W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.