FAQs & Troubleshooting

Close

PE-780D

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 11/08/2011 ID: faqh00000529_001

Where do I put the oil in my machine?

In order to prevent damaging this machine, it must not be oiled by the user.
This machine was manufactured with the necessary amount of oil applied to ensure correct operation, making periodic oiling unnecessary by the end user.
If problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized dealer or the nearest authorized service center.

Do not put the small holes.   Do not put the alternate bobbin case.

Do not put the small holes.

Related Models

BM2800, BM3730, CE1000, CE1010, CE-5000/5000PRW, CE5500T, CE6070T, CE6080T, CE6085T, CE8080/CE8080PRW, CP2410, CP-6500, CP-7500, CS-100T/4000/5000H, CS-6000/6000b/6000t/6000i, CS-8060, CS-8072, CS-8150, ES-2000/2000T, EX-660, H537ST, HC3010, HC7140, HE-120, HE-240, HE300, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 2800D, Innov-is 40, Innov-is 4000D/4000, Innov-is 40e, Innov-is 500D, Innov-is 80, Innov-is 85e, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is NS1750D, Innov-is NS1850D, Innov-is NS80e, Innov-is NV180, JX1400, JX1410, JX1420, JX1710, JX1714, JX2217, JX2417, LB6810, LB6950, LB7950, LS-590, LX3850, ND50E, NX-200, NX-250, NX-400Q/400, NX-450/450Q, NX570Q, NX-600, NX-650Q, PC-210/210PRW, PC-6500, PC-8500/8500D, PE-150V, PE-180D, PE-300S, PE-700II/750D(USB), PE-780D, PS-3100/3700, QC-1000, SC9500, SE-350, SE600, SE750, SQ9050, SQ9130, ST371HD, ULT2001/2001N/2001C/2002D/2003D, XB2510, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL-3750, XL-6452, XL-6562, XM3710, XR37T, XR6060, XR-65T, XR-7700, XS6060, XS6070

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.